Experiments and modeling of mechanism analysis of maize picking loss

Zhen Zhang, Ruijuan Chi, Yuefeng Du, Xiang Pan, Naixi Dong, Bin Xie

Abstract


Maize picking is the main form of maize harvest in China. Maize picking loss accounts for a large proportion of the current maize harvest loss. An experimental study and theoretical analysis were built to explore the influencing factors and rules of maize picking loss. First, the boundary conditions, established by analyzing the mechanism of maize picking, determined the influences of maize picking loss. Then, single-factor experiments and a central composite design (CCD) method were used to determine the influence of various factors and their interactions on maize picking loss. Finally, the models of kernel loss and ear loss were set up to determine the optimal parameter combination of maize picking harvest. Field experiment verification was conducted. The results indicated that the optimal parameters of the maize picking harvest were the rotational speed of pulling rollers of 1120 r/min, operating speed of 1.94 m/s, the inclination of the header of 18° and clearance between the picking plates of 30 mm. By establishing these optimal parameters, the kernel loss rate was 0.065%, and the ear loss rate was 0%. The obtained experimental results and regression models could be used to predict the performance of the maize picking harvest, guide the adjustment of header working parameters, and provide a theoretical basis for reducing the mechanical loss of maize harvesting.
Keywords: maize picking harvest, kernel loss rate, ear loss rate, maize picking platform, response surface analysis
DOI: 10.25165/j.ijabe.20211401.5745

Citation: Zhang Z, Chi R J, Du Y F, Pan X, Dong N X, Xie B. Experiments and modeling of mechanism analysis of maize picking loss. Int J Agric & Biol Eng, 2021; 14(1): 11–19.

Keywords


maize picking harvest, kernel loss rate, ear loss rate, maize picking platform, response surface analysis

Full Text:

PDF

References


USDA, 2017a. Economic Research Services outlook reports and data. https://www.ers.usda.gov/topics/crops/corn/background.aspx. Accessed on [2017-09-10]

Fang H M, Niu M M, Shi S, Liu H, Zhou J. Effect of harvesting methods and grain moisture content on maize harvesting quality. Transactions of the CSAE, 2019; 35(18): 11−18. (in Chinese)

Wang Y Z, Li L L, Gao S, Guo Y N, Zhang G Q, Ming B, et al. Evaluation of grain breakage sensitivity of maize varieties mechanically- harvested by combine harvester. Int J Agric & Biol Eng, 2020; 13(5): 8–16.

National Bureau of Statistics. China Statistical Yearbook. Beijing: China Statistical Press, 2017. (in Chinese)

Announcement of the national bureau of statistics on food production in 2017. National Bureau of Statistics of China, 2017. (in Chinese) http://wwwstatsgovcn/tjsj/zxfb/201712/t201712081561546html.

National grain production development plan (2006-2020). Ministry of Agriculture of the PRC, 2006. (in Chinese)

Aljalil H F, Marley S J, Chowdhury M H. Laboratory studies of a low-damage corn-shelling machine. Transactions of the ASAE, 1980; 23(2): 278−283.

Chen J, Lian Y, Zou R, Zhang S, Ning X B, Han M N. Real-time grain breakage sensing for rice combine harvesters using machine vision technology. Int J Agric & Biol Eng, 2020; 13(3): 194–199.

Yang L, Cui T, Qu Z, Li K H, Yin X W, Han D D, et al. Development and application of mechanized maize harvesters. Int J Agric & Biol Eng, 2016; 9(3): 15−28.

Hughes Company Inc. Husker rolls. US19990356146.2001-06-26, 2001.

Shito H. Maize harvesting machinery. Journal of South Asian and Middle Eastern Studies, 2003; 65(6): 4–8.

Anazodo U G N, Wall G L, Norris E R. Corn physical and mechanical properties as related to combine cylinder performance, Can. Agric. Eng, 1981; 23: 23−30.

Zhang M T. Theoretical analysis and imitation research of corn snapping bars. Master dissertation. Yangling: Northwest University of Agriculture and Forestry Science and Technology, 2008; 59p. (in Chinese).

Sun C, Yang B L, Gao Z J, Zheng Z A, Ni Z Q. Field investigation of ear-snapping process in corn mechanical harvesting. Journal of Chinese Agricultural Mechanization, 2014; 35(3): 15−18. (in Chinese)

Qin J H, Yin Y P, Liu Z Q, Du Y F, Wang G Y, Zhu Z X, et al. Optimisation of maize picking mechanism by simulation analysis and high-speed video experiments. Biosystems Engineering, 2020; 189: 84−98.

Zhou Q. Experimental study on the characteristics of corncob impact. Agricultural Science and Technology and Equipment, 2010; 4: 46−47. (in Chinese).

Li X P, Gao L X, Ma F L, Yu Y Z, Zhang Y L. Experimental research of corn seed kernel on the impacting damage. Journal of Shenyang Agricultural University, 2007; 38(1): 89−93. (in Chinese)

Li X P, Xiong S, Geng L X, Ji J T. Influence of water content on anti-pressing properties of corn ear. Transactions of the CSAE, 2018; 34(2): 25−31. (in Chinese)

Srivastava A K, Herum F L, Stevens K K. Impact parameters related to physical damage to corn kernel. Transactions of the ASABE, 1976; 19(6): 1147−1151.

Balastreire L A, Herum F L. Relaxation modulus for corn endosperm in bending. Transactions of the ASABE, 1978; 21(4): 767−772.

Xu L Z, Li Y M, Ding L F. Contacting mechanics analysis during impact process between rice and threshing component. Transactions of the CSAE, 2008; 24(6): 146−149. (in Chinese)

Wang X R, Li Y M, Xu L Z. Relationship between thresher velocities and rice grain broken rate. Transactions of the CSAE, 2007; 23(8): 16−19. (in Chinese)

Geng A J, Li R X, Liu S X, Zhang J, Zhao K W. Performance experiment of corn harvester header. Journal of Agricultural Machinery, 2013; 44(S2): 27−31. (in Chinese)

Ma X G, He J L, Zhao X Q, Wu Z M. Optimization experiment on rate of snapping loss and broken stalk about plate type header of corn harvester. Agricultural Engineering, 2015; 5(4): 15−18, 22. (in Chinese).

Fan G C, Wang H X, Ji J J, Cao W H, Liu H X, Hao J K, et al. Analysis of influence factor on seed damage rate and loss rate during picking corn-cob. Transactions of the CSAE, 2002; 18(4): 72−74. (in Chinese).

Voicu G, Cǎsǎndroiu T, Stan G. Using the dimensional analysis for a mathematical model to predict the seeds losses at the cleaning system of the cereals harvesting combines. U.P.B. Sci, 2007; 69: 29−39.

Glancey J L. Analysis of header loss from pod stripper combines in green peas. Journal of Agricultural Engineering Research, 1997; 68(1): 1−10.

Du Y F, Zhu Z X, Song Z H, Mao E R, Li F Q. Simulation of divider and snapping roll for small-scale corn harvester. Journal of Agricultural Machinery, 2012; 43(S1): 100−105. (in Chinese)

Mathanker S K, Hansen A C. Harvesting system design and performance. In: Shastri Y, Hansen A, Rodriguez L, Ting K (Ed.). Engineering and Science of Biomass Feedstock Production and Provision, New York: Springer, 2014; pp.85−139.

Zhang Z L. Design and experimental of a corn stripping mechanism. PhD dissertation. China Agricultural University, 2015; 108p. (in Chinese)

Zhu X X, Zhu G R. Strength of polymer materials. First edition, Hangzhou: Zhejiang University Press, 1992; pp.176-220. (in Chinese)

Wang X R. Mechanical properties of rice grain and threshing injury based on the energy conservation. PhD dissertation. Zhenjiang: Jiangsu University, 2007; 137p. (in Chinese)

Zhang Z L, Han Z D, Li X D, Hao F P, Han K L, Han L J. Optimization of parameters for stalk chopper of corn harvester for reaping both corn stalk and spike. Journal of Agricultural Machinery, 2018; 49(S1): 273−281. (in Chinese)

Quaye S A, Schertz C E. Corncob harvest with counter-rotating rollers. Transactions of the ASAE, 1983; 26(5): 1303−1307.




Copyright (c) 2021 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office