Design and experiment of a Chinese chive harvester

Yulong Feng, Xuchao Yin, Hairong Jin, Wenyu Tong, Xiaofeng Ning

Abstract


Recognizing the labor intensity of current domestic Chinese chive harvesting and the need for its mechanized harvesting, a self-propelled electric Chinese chive harvester is designed. The machine is composed of a control system, supporting mechanism, cutting parts, conveying and clamping mechanisms, frame, and collection system. It can complete Chinese chive feeding, cutting, transmission, and binning operations at one time. It has a cutting width of 0.25 m and wheelbases of 260 mm and 460 mm. Two 12 V, 42 Ah lead-acid batteries were used in series as the power supply. The mechanical properties of Chinese chive were analyzed, and shear and compression tests were carried out to determine that the average value of the maximum shear force on the chives is 129 N. Up to a compressive force of 225 N, Chinese chives are not damaged. According to the physical characteristics of Chinese chives and the requirements of the harvesting operations, design and calculation of the key components of the harvester's transmission mechanism and the strength of the whole machine frame were completed. An embedded control system and Cortex-M3 microprocessor were used to control the harvester and realize its functions of rolling and harvesting while regulating its speed and protecting its motor. Using the Box-Behnken test design method, the machine's operating speed, cutter speed, and cutter height were selected as influencing factors, and the lodging rate and loss rate were evaluated as a test. A mathematical regression model of influencing factors and evaluation indexes was established to analyze the influence of these factors and indexes and optimize test parameters. The optimal parameter combination is determined to be: operating speed, 1.1 km/h; cutter speed, 220 r/min; cutter height 2.0 cm. The parameters were verified from field tests and the results showed that under the optimized parameter combination, the average lodging rate was 3.96% and the average loss rate was 3.23%, indicating that the Chinese chive harvester meets the agronomic requirements of Chinese chive harvesting. This harvester could be modified to harvest other crops such as chrysanthemums and Mongolian Chinese chive.
Keywords: harvester, clamping mechanism, test design, lodging rate, Chinese chive
DOI: 10.25165/j.ijabe.20231602.7067

Citation: Feng Y L, Yin X C, Jin H R, Tong W Y, Ning X F. Design and experiment of a Chinese chive harvester. Int J Agric & Biol Eng, 2023; 16(2): 125－131.

Keywords


harvester, clamping mechanism, test design, lodging rate, Chinese chive

Full Text:

PDF

References


Yang Z H. High quality and high yield cultivation techniques for leeks. Vegetables, 2012; 11: 19-20. (in Chinese)

Sun X Y. Talking about the current state of research on automated vegetable harvesting machinery. Agricultural Machinery, 2008; 11: 43. (in Chinese)

Harrell R C, Adsit P D, Munilla R D, Slaughter D C. Robotic Picking of Citrus. Robitica, 2012; 8: 269-278.

Geng R Y, Zhang T Z, Luo H, Yang L. Analysis of the development trend of agricultural machinery in China. Transactions of the CSAM, 2004; 35(4): 208-210. (in Chinese)

Song J, Zhang T Z, Xu L M, Tang X Y. Research Actuality and Prospect of Picking Robot for Fruits and Vegetables. Transactions of the CSAM, 2006; 37(5): 158-162. (in Chinese)

Wei Y, Qin G M, Jin Y, Li Q. Research status and development trend of leafy vegetable harvesting machinery. Agricultural Development and Equipment,2016; 8: 98-100.(in Chinese)

Han J Y, Lu B Y, Guo A R, Wang J. The Present Situation and Developing Direction of Agricultural Automation in China. Journal of Agricultural Mechanization Research, 2003; 3: 8-10.(in Chinese)

Van N N, Suguru Y. Development of prototype harvester for head lettuce. Engineering in Agriculture, Environment and Food, 2015; 8(1): 18-25.

Didamony M I E, Shal A M E. Fabrication and evaluation of a cabbage harvester prototype. Agriculture, 2020; 10(12): 1–11.

Wang T X, Li R X. Study on mechanical properties and harvesting and cutting table of Chinese chive. Proceedings of the International Annual Conference of CSAM, 2012; 2: 130-134. (in Chinese)

Gao G H, Xie H F, Wang T B. EDEM simulation and test of drawing mechanical properties of vegetable harvester in facility. Transactions of the CSAE, 2017; 33(23): 24-31. (in Chinese)

Xun G L, Wang J S, Zhang J S. Experiment on geometric and mechanical properties of Chinese chives at ripe harvest time. Agricultural Engineering Institute, 2020; 10(6): 94-97. (in Chinese)

Gao L, Yuan Y W, Yi J G, Kong D G. Improved design and test of a small leek harvester. Food and Machinery, 2016; 4: 117-119. (in Chinese)

Hyeon-Jong Jun. Development of a stem-cutting type harvester for non-head leafy green vegetables. PhD thesis, KangWon National University, Samcheok, Republic of Korea, 2006.

Shi X. Study on body leveling system of self-propelled corn combine harvesting locomotive. Jilin University, 2017. (in Chinese)

Miao P. Study on intelligent control system for electric leaf vegetable harvesting. Jiangsu University, 2020. (in Chinese)

Zhang J. Experiment of electric leek harvester in greenhouses. Agricultural Machinery Technology Extension, 2020; 2: 58-59. (in Chinese)

Du D, Wang J, Xie L, Deng F. Design and field test of a new compact self-propelled cabbage harvester. Transactions of the ASABE, 2019; 62(5): 1243–1250.

Zheng Z A, Cui B C, Gao W K, Wei Y B, Wu M, Li A C. Design and field test of a special Chinese herbal medicine harvester. Int J Agric & Biol Eng, 2022; 15(5): 109–115.

Lu J Q, Yang X H, Feng X, Li Z H, Li J C, Liu Z Y. Design and experiment of sowing depth control device for potato seeder. Transactions of the CSAE, 2020; 36(12): 13-21. (in Chinese)




Copyright (c) 2023 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office