Design and experiment of the soil-covering and soil-compacting device for seedling raising and sowing of trough type panax notoginseng

Wencai Yang, Pu Wang, Lulu Xu, Ziyuan Tian, Jing Zhao, Yijie Zhang, Zhenjie Yang

Abstract


In order to improve the seedling quality of Panax notoginseng, combined with the special agronomic requirements of Panax notoginseng, a sharp angle roller soil-covering and soil-compacting device integrating the functions of soil-covering and soil-compacting was designed. Based on the theoretical analysis of seed ditch conditions, soil-covering process and soil-compacting process, the structure of soil-covering and soil-compacting device was designed. Through theoretical analysis and calculation, the diameter and length of soil-covering and soil-compacting wheel were 20 cm and 10.7-14.1 cm, respectively, the sharp angle and height range were 45°-105° and 0.8-1.6 cm respectively, and the spring stiffness was 38.54 N/mm; Using the discrete element method to simulate the soil-covering and soil-compacting process, it was obtained that when the sharp angle range was 60°-90°, the sharp angle height range was 0.8-1.2 cm, and the soil-covering effect was better; Taking the forward speed, ballast pressure, sharp angle and sharp angle height of the planter as the test factors, and taking the soil-covering thickness, grain spacing and soil compactness as the indexes, the four factor and three-level Box-Behnken Design test was carried out. The response surface test analysis method was used to establish the regression equation between the factors and indexes, and determine the best parameter combination: the forward speed was 6.5 m/min, the ballast pressure was 360.5 N, the sharp angle was 67°, and the sharp angle height was 1 cm, at this time, the soil-covering thickness was 0.64 cm, the grain spacing was 5.03 cm, and the soil compactness was 321.77 kPa. According to the soil trough test, the design of soil-covering and soil-compacting device met the agronomic requirements of plant spacing, soil-compactness and soil-covering thickness during seedling sowing of Panax notoginseng. The research results can provide a reference for the design of Panax notoginseng seedling planter integrating pressing hole (ditching), sowing, soil-covering and soil-compacting.
Key words: Panax notoginseng, trough type, seedling raising and sowing, soil-covering and soil-compacting, EDEM, test
DOI: 10.25165/j.ijabe.20231605.7606

Citation: Yang W C, Pu W, Xu L L, Tian Z Y, Zhao J, Zhang Y J, et al. Design and experiment of the soil-covering and soil-compacting device for seedling raising and sowing of trough type panax notoginseng. Int J Agric & Biol Eng, 2023; 16(5): 113–122.

Keywords


Panax notoginseng, trough type, seedling raising and sowing, soil-covering and soil-compacting, EDEM, test

Full Text:

PDF

References


Intelligent research consultation. Analysis on planting area, output and main trade areas of Panax notoginseng in China in 2021. https://baijiahao.baidu.com/s?id=1706315442668453736&wfr=spider&for=pc, 2022.3.

Yang W C, Pu W, Pan W J, Zhang X W, Zhang L, Zheng J X. Design and experiment of soil-covering and compacting device for Panax notoginseng seedling sowing. Journal of South China Agricultural University, 2022; 43(2): 122-132. (in Chinese)

Yang W C, Zhu Y Y, Du Q, Xi Q. Engineering and technology system analysis on pseudo-ginseng industrial seedling production in Yunnan. Journal of Southern Agriculture, 2012; 43(12): 2069-2073. (in Chinese)

Berti M T, Johnson B L, Henson A. Seeding depth and soil packing affect pure live seed emergence of cuphea. Industrial Crops and Products, 2008; 27(3): 272-297.

Bassegio D, Santos R F, Secco D, Zanão L A, Werncke I, Sarto M V M. Short-term effects of crop rotations on soil chemical properties under no-tillage condition. Australian Journal of Crop Science, 2015; 9(1): 49-54.

Haruna S I, Nkongolo N V. Influence of cover crop, tillage, and crop rotation management on soil nutrients. Agriculture. 2020; 10(6): 225.

Altikat S, Celik A. The effects of tillage and intra-row compaction on seedbed properties and red lentil emergence under dry land conditions. Soil & Tillage Research, 2011; 114(1): 1-8.

Chețan F, Chețan C, Rusu T, Șimon A. Effects of the winter wheat cultivation in tillage system without plowing on the soil properties. Ards Turda, 2015; 8(22): 119 - 125.

Sawant C K P, Kumar A, Mani I, Singh J K, Yadav R, Sahoo R N. Performance evaluation of IARI wheat seed-cum-fertilizer plot drill for pearl millet-wheat cropping system on permanent raised bed system. Journal of Agricultural Engineering, 2019; 55(4): 1-12.

Guo H, Chen Z, Jia H L, Zheng T Z, Wang G, Wang Q. Design and experiment of soil-covering and soil-compacting device with cone-shaped structure of wheel. Transactions of the CSAE, 2017; 33(12): 56-65. (in Chinese)

Zhang Z J, Sun X W, Jin Z N, Bing Z, Sun Q Y, Tong J. Design and test of crushing bionic soil-covering device of soybean seeder. Transactions of the CSAM, 2018; 49(2): 34-40, 73. (in Chinese)

Zheng Z Q, Fu Z L, Wang C Y, Huang Y X, He J P. Design and experimental research on soil-covering device with linkage and differential adjustment of potato planter. Agriculture, 2021; 11(7): 665-665.

Li K, Li S Z, Teng X, Deng Z L, Huang W B, Gan F F, et al. Integrated design and evaluation of a soil-covering and film-mulching device for sugarcane transverse planters. Agronomy, 2021; 11(7): 1382-1382.

Bi S Y, Liu W D, Guo L J. Dynamic analysis and parameter optimization of coupled bionic press roller on soybean ridge. Journal of Chinese Agricultural Mechanization, 2020; 41(9): 25-32. (in Chinese)

Liu H J, Zhao S H, Tan H W, Yang Y Q, Zhang X M. Investigation on press device in reducing adhesion and resistance based on scrape and vibration principle. Transactions of the CSAM, 2018; 49(1): 86-92. (in Chinese)

Tong J, Zhang Q Z, Chen D H, Chang Y, Wang H C. Effects of bionic geometric structure press rollers on reducing rolling resistance and adhesion against soil. Applied Mechanics and Materials, 2013; 461: 63-72.

Jia H L, Guo H, Guo M Z, Wang L C, Zhao J L, Fan X H. Finite element analysis of performance on elastic press wheel of row sowing plow machine for covering with soil and its experiment. Transactions of the CSAE, 2015; 31(21): 9-16, 315. (in Chinese)

Fukami K, Mukunoki T, Nakano K, Matsuo N, Okayasu T. Water leakage control by using vibratory roller on a dry-seeded rice field in southwestern Japan. Soil & Tillage Research, 2017; 166: 138 -146.

Inano I, Momono H, Suzuki T, Arita T. Study on improving the emergence of direct sowing sugar beets (Part 1): Improving emergence rate by press roller attached to seeder. Journal of the Japanese Society of Agricultural Machinery, 2006; 68(6): 75-82..

Taser O F, Kara O. Silage maize (Zea mays L.) seedlings emergence as influenced by soil compaction treatments and contact pressures. Plant Soil & Environment, 2006; 51(7): 289-295.

Tang Q, Wu C Y, Yuan W S,Wu J, Wang S F. Structure design on compacting and covering soil device of rape shallow transplanting machine. Journal of Chinese Agricultural Mechanization, 2016; 37(3): 20-22, 33..

Li M, Xu S, Yang Y W, Guo L, Tong J. A 3D simulation model of corn stubble cutting using finite element method. Soil & Tillage Research, 2017; 166: 43-51.

Bentaher H, Ibrahmi A, Hamza E, Hbaie M, Kantchev G, Maalej A, et al. Finite element simulation of moldboard–soil interaction. Soil and Tillage Research, 2013; 134(8): 11-16.

Ahmad F, Qiu B J, Ding Q S, Ding W M, Khan Z M, Shoaib M, et al. Discrete element method simulation of disc type furrow openers in paddy soil. Int J Agric & Biol Eng, 2020; 13(4): 103–110.

Li L Y, Gong X, Xu T, Guo P. Simulation analysis of soil-covering process. Journal of Physics: Conference Series, 2020, 1578: 012099.

Sun J F, Chen H M, Wang Z M, Yang Z, Liu Z, Duan J L. Study on plowing performance of EDEM low-resistance animal bionic device based on red soil. Soil & Tillage Research, 2020; 196: 104336-104336. .

Koolen A J, Kuipers H. Agricultural soil mechanics. Springer Science & Business Media, 2012.

Agricultural Machinery Design Manual. Beijing: China Agricultural Science and Technology Press, 2007. (in Chinese)

Yang W C, Xu L L, Du Y F, Lang C C, Pan W J. Design and experiment of the pressing wheel profiling ditching device for sowing panax notoginseng to grow seedlings. Transactions of the CSAE, 2020; 36(7): 53-62. (in Chinese)

Xiang W, Wu M L, Lv J N, Quan W, Ma L, Liu J J. Calibration of simulation physical parameters of clay loam based on soil accumulation test. Transactions of the CSAE, 2019; 35(12): 116-123. (in Chinese)

Xing J J, Zhang R, Wu P, Zhang X R, Dong X H, Chen Y, et al. Parameter calibration of discrete element simulation model for latosol particles in hot areas of Hainan Province. Transactions of the CSAE, 2020; 36(5): 158-166. (in Chinese)




Copyright (c) 2023 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office