Airflow distribution law of multi-branch pipe of pneumatic rice direct seeder based on dimensional analysis

Wei Qin, Zaiman Wang, Minghua Zhang, Siyu He, Xuguo Wang, Youcong Jiang, Zishun Huang, Ying Zang

Abstract


In order to investigate the flow characteristics and distribution law of airflow in multi-branch pipe of pneumatic rice precision direct seeder and obtain the mathematical model between airflow parameters and pipe geometry structure. In this study, the airflow flow law of the multi-branch pipeline of the pneumatic system was studied, the mechanism of airflow flow in the multi-branch pipe was analyzed, and it was clarified that the main factors affecting the airflow flow in the pipe, namely, air density, air dynamic viscosity, the total flow rate of the inlet branch pipe, the length of the closed end of the header, the inner diameter of the outlet branch pipe, and the outlet branch pipe spacing. Numerical simulations were carried out using Fluent simulation software to elucidate the cause of multi-branch pipes of uneven distribution of airflow in multi-branch pipes, the empirical equation among these factors and the flow velocity of the outlet branch pipe are established by dimensional analysis method. The bench test results show that the established empirical equations are applicable in the following ranges: 0.018 m3/s≤Q≤0.054 m3/s, 0.045 m≤d≤0.05 m, 0.075 m≤L≤0.125 m, 0.7 m≤Y1≤0.875 m (0.5 m≤Y2≤0.75 m, 0.36 m≤Y3≤0.45 m), the prediction accuracy can be controlled within 10% of the empirical formula, which can provide a reference for the prediction and optimization design of outlet velocity of the multi-branch pipe.
Keywords: pneumatic system, multi-branch pipe, axial momentum conservation, Fluent, dimensional analysis
DOI: 10.25165/j.ijabe.20231601.7663

Citation: Qin W, Wang Z M, Zhang M H, He S Y, Wang X G, Jiang Y C, et al. Airflow distribution law of multi-branch pipe of pneumatic rice direct seeder based on dimensional analysis. Int J Agric & Biol Eng, 2023; 16(1): 111–127.

Keywords


pneumatic system, multi-branch pipe, axial momentum conservation, Fluent, dimensional analysis

Full Text:

PDF

References


Robert L, Pigford, Muhammad A, Yvon D M. Flow distribution in piping manifolds. Ind Eng Chem Fundam, 1983; 22(4): 463–471.

Song P F, Yang L R. Research and design on flow characteristics of Single-phase multi-branch parallel pipeline. Petroleum Refinery Engineering, 2020; 50(3): 42–47. (in Chinese)

Łukasz A, Janusz W. Thermal performance of multi-pipe earth-to-air heat exchangers considering the non-uniform distribution of air between parallel pipes. Renewable Energy, 2018; (88): 101896. doi: 10.1016/j.geothermics. 2020.101896.

Foo K, Roy M, Klaus A H. Numerical assessment of pulsatile flow through diverging tees with a sharp and round-edge junction. Int J Heat and Fluid Flow, 2019; 76: 1–13.

Dong J, Ben X H. CFD analysis of a novel modular manifold with multi-stage Channels for uniform air distribution in a fuel cell stack. Applied Thermal Engineering, 2017; 124: 286–293.

Mohammad A Z, Elham O A. Study of the flow distribution in Parallel micro-channels with a triangular manifold. J Braz Soc Mech Sci, 2019; 42(1): 46. doi: 10.1007/s40430-019-2140-x.

Ikeda A, Yoshida T, Shirota M, Takei M. Method of the non-split application of fertilizer to rice "Kosihikari" on pneumatic direct seeding culture on submerged paddy filed. Res Bull Aichi Agric Res Ctr, 2003; 35: 23–29.

Zhang G Q, Christopher C, Thomas B, Lee I-B, Kacira M. Computational fluid dynamics (CFD) research and application in agricultural and biological engineering. Comput Electron Agri, 2018; 14: 1–2.

Xing H, Zang Y, Wang Z M, Luo X W, Pei J, He S Y, et al. Design and parameter optimization of rice pneumatic seeding metering device with adjustable seeding rate. Transactions of the CSAE, 2018; 35(4): 20–28. (in Chinese)

Salavat M, Ildar B, Zinnur R, Ramil L, Elmas N. Numerical simulation of two-phase “Air-Seed” flow in the distribution system of the grain seeder. Comput Electron Agri, 2020; 168: 105151. doi: 10.1016/j.compag.2019. 105151.

Liao Q X, Yang S, Liao Y T, Cong J H. Modeling for performance and parameters of pneumatic seed-metering system of precision planter for rapeseed. Transactions of the CSAE, 2013; 29(17): 9–15. (in Chinese)

Yin X W, Yang L, Zhang D, Cui T, Han D, Zhang T, et al. Design and experiment of balance and low-loss air allotter in air pressure maize precision planter. Transactions of the CSAE, 2016; 32(19): 9–17. (in Chinese)

Yasuhiko S, Seiichi I, Ikuma E, Hideyuki H, Kazuo H. development of pneumatic direct seeding system for submerged paddy field (Part 1)-Basic study on the development of seeding system. J Jpn Agri Machinery Soc, 1996; 58(3): 69–76.

Tadashi C, Masami F, Masaaki O, Osamu M. Development of air-assisted strip seeding for direct seeding in flooded paddy fields: Seeding machine and effect of air assistance. Jpn J Farm Work Res, 2009; 44(4): 211–218.

Nguyen T H, Tadashi C, Seishu T, Ngo T H. Application of a similarity measure using fuzzy sets to select the optimal plan for an air-assisted rice seeder. Applied Science, 2021; 11(6715): 1–15.

Masami F, Tadashi C, Yukiharu S, Takayuki T, Masahiro S, Hisashi H. Developing direct seeding cultivation using an air-assisted strip seeder. Jpn Agric Res Q, 2015; 49(3): 227–233.

Hassan J M, Abdulwahhab A, Kamil B K. Flow distribution in manifolds. J Eng Sustain Dev, 2008; 12(4): 159–176.

Jimmy C K T, Ephraim M S, John P A. Geometric strategies for attainment of identical outflows through all of the exits ports of a distribution manifold in a manifold system. Applied Thermal Engineering, 2009; 29(17-18): 3552–3560.

Shu C X, Wei Y P, Liao Y T, Lei X L, Li Z D, Wang D, et al. Influence of air blower parameters of pneumatic seed-metering system for rapeseed on negative pressure characteristics and air blower selection. Transactions of the CSAE, 2016; 32(10): 26–33. (in Chinese)

Qin L, Zhou F, Yang J X, Wu R Z, Lu L. Numerical research on flow distribution and pressure loss of multi-branch pipeline based on confluence and distribution. J South China Univ Techno: Nat Sci Ed, 2021; 49(9): 109–119. (in Chinese)

Jiang Y. Proper formulation of π-equation and a comparison with regressive orthogonal rotating experimental design. Transactions of the CSAE, 1996; 12(3): 7–11. (in Chinese)

Jiang Y. Verification of the theory for a sphere settling in fluid with resistance in different ranges by experiment of π-testing Design. Transactions of the CSAE, 1996; 12(3): 12–15. (in Chinese)

Jiang Y, Tu C, Liu D, Jiang E C. Examination of function of π-equation’s prediction via experiment of settling time of a sphere in a fluid. Transactions of the CSAE, 1996; 12(3): 1–6. (in Chinese)

Zhang Z G, Jiang Y Y, Zhang M, Shen D C. Experimental study on rapeseed extrusion cooking using dimensional analysis. Transactions of the CSAE, 2007; 23(7): 247–252. (in Chinese)

Sivasankaran S, Hany R A, Abdulaziz S A, Mohammad S. Mathematical modeling (buckingham's  theorem) and optimization technique on mechanically alloyed nanocomposite materials. Int J Eng Adv Technol, 2020; 4(9): 1915–1921.

Li J H, Lai Q H, Su W, Xie Y R, Zhang Z G. Research on the influence of the suction force on spherical particles in suction flow. Powder Technology, 2021; 393(9): 824–836.

André Z S, Sérgio L J, Sávio S V V. The effect of the volumetric flow rate and endotracheal tube diameter on the pressure distribution in human airways. Med Eng Phys, 2021; 92: 71–79.

Han D D, Zhang D X, Jing H R, Yang L, Cui T, Ding Y Q, et al. DEM-CFD coupling simulation and optimization of an inside-filling air-blowing maize precision seed-metering device. Comput Electron Agri, 2018; 150: 426–438.

Zheng W H, Jiang Y, Ma X, Qi L. Development of a liquid-jet nozzle for fertilizer injection in paddy fields using CFD. Comput Electron Agri, 2019; 167: 105061. doi: 10.1016/j.compag.2019.105061.

Xing H, Wang Z M, Luo X W, Cao X M, Liu C B, Zang Y. General structure design and field experiment of pneumatic rice direct-seeder. Int J Agri Bio Eng, 2021; 10(6): 31–42.

Bajura R A. A Model for Flow Distribution in Manifolds. J. Eng. Power, 1971; 93(1): 7–13.

Xing H, Wang Z M, Luo X W, Zang Y, He S Y, Peng X, et al. Design and experimental analysis of rice pneumatic seeder with adjustable rate. Int J Agri Bio Eng, 2021; 14(4): 113–122.

Xing H, Wang Z M, Luo X W, He S Y, Zang Y. Mechanism modeling and experimental analysis of seed throwing with rice pneumatic seed metering device with adjustable seeding rate. Comput Electron Agri, 2020; 178: 105697. doi: 10.1016/j.compag.2020.105697.

Xing H, Wang Z M, Luo X W, Cao X M, Liu C B, Zang Y. General structure design and field experiment of pneumatic rice direct-seeder. Int J Agric & Biol Eng, 2017; 10(6): 31–42.




Copyright (c) 2023 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office