Performance evaluation of mechanical blossom thinning in Y-trellis pear orchard
DOI:
https://doi.org/10.25165/ijabe.v18i4.9195Keywords:
agricultural machinery, mechanical blossom thinning, Y-trellis pear orchard, performance evaluationAbstract
As the largest fruit producer in the world, China’s comprehensive orchard mechanization rate is below 30% and faces the problem of aging orchard farmers. Thinning is an essential agronomic section in orchard management. Therefore, to get a marketable product, artificial hand fruit thinning (AHFT) has become a major but costly management practice in modern orchard planting. The authors developed two types of new orchard blossom thinners: tractor-mounted three-arm blossom thinner (TTBT) and hand-held electric blossom thinner (HEBT). The arm shape, spindle rotation speed, and rope arrangement density of TTBT can be adjusted flexibly according to the canopy structure of the fruit tree. HEBT is portable and suitable for different canopy types, especially for traditional orchard with complex-structured canopy. In this paper, a performance evaluation of the two types of blossom thinners on Y-trellis ‘Sucui’ No.1 pear orchard was carried out. In field tests, three treatments were designed and tested, which are TTBT combined with AHFT, HEBT combined with AHFT, and AHFT only. Four indices were used to evaluate the tests: blossom retention rate, fruit setting rate, fruit yield and quality, and work efficiency and cost. The test results showed that the blossom retention rate of TTBT and HEBT at 50% for Y-trellis ‘Sucui’ No.1 pear orchard was perfect; the difference of blossom retention rate and coefficient of variation of every layer of TTBT was very small, and the mean coefficient of variation was 2.97%, which is 1.98% lower than that of HEBT, meaning that the working stability of TTBT was higher than HEBT. The working efficiencies of TTBT and HEBT were much higher than that of AHFT, specifically, 130 and seven times higher, respectively. Although mechanical blossom thinning reduces the fruit setting rate to a certain extent, it has no effect on fruit yield and quality after fruit thinning for final marketable fruit. The profitable areas of TTBT and HEBT were 0.87 hm2 and 0.08 hm2, respectively. Keywords: agricultural machinery, mechanical blossom thinning, Y-trellis pear orchard, performance evaluation DOI: 10.25165/j.ijabe.20251804.9195 Citation: Lei X H, Lyu X, Zhang H B, Huang K, Sun Y H, Ma Z B. Performance evaluation of mechanical blossom thinning in Y-trellis pear orchard. Int J Agric & Biol Eng, 2025; 18(4): 110–116.References
Yuan Y, Bai S, Niu K, Zhou L, Zhao B, Wei L, et al. Research progress on mechanized harvesting technology and equipment for forest fruit. Transactions of the CSAE, 2022; 38(9): 53–63.
National bureau of statistics of the People’s Republic of China. Chinese Statistical Yearbook. China Statistics Press, 2022; 935p. (in Chinese)
Li T, Qiu Q, Zhao C, Xie F. Task planning of multi-arm harvesting robots for high-density dwarf orchards. Transactions of the CSAE, 2021; 37(2): 1–10.
Zheng Y, Jiang S, Chen B, Lyu H, Wang C, Kang F. Review on technology and equipment of mechanization in hilly orchard. Transactions of the CSAM, 2020; 51(11): 1–20.
Wang W, Wang G, Tian L, Li X, Lyu X, Zhang Y, et al. Fruit scientific research in new China in the past 70 years: pear. Journal of Fruit Science, 2019; 36(10): 1273–1282.
Fu L, Majeed Y, Zhang X, Karkee M, Zhang Q. Faster R-CNN-based apple detection in dense-foliage fruiting-wall trees using RGB and depth features for robotic harvesting. Biosystems Engineering, 2020; 197: 245–256.
Rivero R, Sonsteby A, Heide O, Mage F, Remberg S. Flowering phenology and the interrelations between phenological stages in apple trees (Malus domestica Borkh) as influenced by the Nordic climate. Acta Agriculturae svandinavica Section B-Soil and Plant Science, 2017; 67(4): 292–302.
Pavanello A, Zoth M, Ayub R. Manage of crop load to improve fruit quality in plums. Revista Brasileira de Fruticultura, 2018; 40(4): 721.
Barreto C, Antunes L, Ferreira L, Navroski R, Benati J, Pereira J. Mechanical flower thinning in peach trees. Revista Brasileira de Fruticultura, 2019; 41(6): 465. [10] Miller S, Tworkoski T. Blossom thinning in apple and peach with an essential oil. HortScience, 2010; 45: 1218–1225.
Hampson C, Bedford K. Efficacy of blossom thinning treatments to reduce fruit set and increase fruit size of ambrosia and aurora golden gala apples. Canadian Journal of Plant Science, 2011; 91: 983–990.
Hu C, Sun C, Xu Y. Experiment and analysis of mechanical properties for branches pedicel node and receptacles corolla node of apple tree. Journal of Qingdao Agricultural University (Natural Science), 2015; 32(3): 211–214.
Sun C, Hu C, Hou Q, Pan Z. Simulation of mechanical thinning flower actuator based on ADAMS. Journal of Agricultural Mechanization Research, 2015; 37(12): 70–73.
Hu C, Sun C, Ji J. Performance experiment and analysis on mechanical thinning flower actuator. Journal of Chinese Agricultural Mechanization, 2015; 36(5): 24–28.
Yuan C. Design and performance test of peach blossom thinning machine. Hebei: Hebei Agricultural University, 2020; 64 p. (in Chinese)
Wang Q. Design and research of mechanical blossom thinning device for the dwarf dense fruit trees. Hebei Agricultural University, 2018; 71p. (in Chinese)
Assirelli A, Caracciolo G, Cacchi M, Sirri S, Pallottino F, Costa C. Evaluation of the detachment force needed for mechanical thinning of green peach fruits. Sustainability, 2018; 10: 2291.
Assirelli A, Giovannini D, Cacchi M, Sirri S, Baruzzi G, Caracciolo G. Evaluation of a new machine for flower and fruit thinning in stone fruits. Sustainability, 2018; 10: 4088.
Assirelli A, Caracciolo G, Roccuzzo G, Stagno F. New tools for mechanical thinning of apricot fruitlets. Agriculture, 2021; 11: 1138.
Lordan J, Alins G, Àvila G, Torres E, Carbó J, Bonany J, et al. Screening of eco-friendly thinning agents and adjusting mechanical thinning on ‘Gala’, ‘Golden Delicious’ and ‘Fuji’ apple trees. Scientia Horticulturae, 2018; 239: 141–155.
Penzel M, Pflanz M, Gebbers R, Zude-Sasse M. Tree-adapted mechanical flower thinning prevents yield loss caused by over-thinning of trees with low flower set in apple. European Journal of Horticultural Science, 2021; 86(1): 88–98.
Choi J, Gu M, Choi J, Han J, Yim S, Kim Y, et al. Growth and Fruit production of Asian pear trees grown on Y-, T-, and vase-training systems. Horticulture Environment & Biotechnology, 2014; 55(1): 1–18.
Choi J, Choi J, Han J, Yim S, Jung S, Choi H. Comparision of growth characteristics and productivity of young trees of a new cultivar ‘manpungbae’ trained to trellis systems. Horticultural Science and Technology, 2017; 35(4): 393–401.
Zhao L, Jia Z, Li G, Zhang T, Wei M. N utilization, residual and loss characteristics of spring-topdressing (N-15-urea) pear orchards in the old course of the yellow river area. Agronomy-Basel, 2022; 12(11): 2682.
Yang Q, Lin J, Li X, Yan Z, Sheng B. Effects of four kinds of tree type on pear growth and fruit quality. Jiangsu Agricultural Sciences, 2007; 6: 150–152. (in Chinese)
Han W, Han N, He X, Zhao X. Berry thinning to reduce bunch compactness improves fruit quality of Cabernet Sauvignon (Vitis vinifera L.). Scientia Horticulturae, 2019; 246: 589–596.
Lei X, Qi Y, Zeng J, Yuan Q, Chang Y, Lyu X. Development of unilateral obstacle-avoiding mower for Y-trellis pear orchard. Int J Agric & Biol Eng, 2022; 15(1): 71–78.
Ministry of Agriculture and Rural Affairs of the People’s Republic of China. Standards for appearance grades of pears, 2001; NY/T 440: 2001. (in Chinese)
Inspection and Quarantine of the People’s Republic of China (AQSIQ). Fresh pears, 2008; GB/T 10650: 2008. (in Chinese)
McClure K, Cline J. Mechanical blossom thinning of apples and influence on yield, fruit quality and spur leaf area. Canadian Journal of Plant Science, 2015; 95: 887–896.
Downloads
Published
How to Cite
Issue
Section
License
IJABE is an international peer reviewed open access journal, adopting Creative Commons Copyright Notices as follows.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
