Design and test of the progressive push-out automatic seedling taking device for vegetable substrate block seedlings

Authors

  • Zhichao Cui 1. Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China; 2. College of Mechanical and Electrical Engineering, Fujian Agriculture and Forestry University, Fuzhou 350100, China
  • Jingjing Fu Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
  • Jicheng Li College of Mechanical and Electrical Engineering, Fujian Agriculture and Forestry University, Fuzhou 350100, China
  • Haibo Ji Nantong Shengli Electromechanical Technology Co., Ltd, Nantong 226000, China
  • Changhao Wu Nantong Shengli Electromechanical Technology Co., Ltd, Nantong 226000, China
  • Shuhe Zheng College of Mechanical and Electrical Engineering, Fujian Agriculture and Forestry University, Fuzhou 350100, China
  • Tiqiong Xiao Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China
  • Yongsheng Chen 1. Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China; 3. Institute of Western Agriculture, Chinese Academy of Agricultural Sciences, Changji 831100, China
  • Chenghao Zhang Key Laboratory of Agricultural Equipment for Hilly and Mountainous Areas in Southeastern China (Co-construction by Ministry and Province), Ministry of Agriculture and Rural Affairs, Hangzhou 310058, China)
  • Yating Yang Institute of Western Agriculture, Chinese Academy of Agricultural Sciences, Changji 831100, China
  • Chunsong Guan Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing 210014, China

DOI:

https://doi.org/10.25165/ijabe.v18i4.9346

Keywords:

transplanter, substrate block seedlings, automatic seedling taking device, PLC control system, progressive push-out

Abstract

Aiming at the problems of low success rate and high seedling injury rate of automatic vegetable transplanting, this study focused on cabbage substrate block seedlings and developed a progressive push-out automatic seedling device controlled by a PLC system. Based on the friction mechanical properties of seedlings-tray during seedling taking, the collision rebound theoretical analysis of substrate block seedling delivery and the finite element simulation analysis of the seedling taking mechanism were carried out to determine the conditions for stable seedling taking and delivery of the device and the working parameters of the key mechanisms. To evaluate individual parameter effects, a test bench was built, and the effective ranges of key factors were subsequently determined. Three key experimental factors, the inclination angle of the limit guide plate, the seedling separation channel width, and the seedling separation cylinder pressure were investigated using an L9(34) orthogonal array design with blockage rate and breakage rate as evaluation metrics. The range and variance analysis methods were employed to determine the relative significance of each factor’s influence on the performance indicators. The optimal parameters were determined as: the inclination angle of the limiting guide plate was 3.5°, the width of the seedling separation channel was 50 mm, and the pressure of the seedling separation cylinder was 0.6 MPa. Under these conditions, the seedling taking effect was significantly improved: the blockage rate was 2.46%, the breakage rate was 3.18%, and the seedling taking success rate was 94.36%. The optimal parameter combination was verified by the experiment: the average blockage rate was 3.23%, the average breakage rate was 3.68%, and the average success rate was 93.09%. Compared with the orthogonal experiment, the relative success rate error was 1.27%, indicating that the device has high stability. This study will provide a reference for the design of automatic vegetable transplanters. Keywords: transplanter, substrate block seedlings, automatic seedling taking device, PLC control system, progressive push-out DOI: 10.25165/j.ijabe.20251804.9346 Citation: Cui Z C, Fu J J, Li J C, Ji H B, Wu C H, Zheng S H, et al. Design and test of the progressive push-out automatic seedling taking device for vegetable substrate block seedlings. Int J Agric & Biol Eng, 2025; 18(4): 89–100.

References

Chen Y S. Mechanization technology and model of vegetable production. Zhenjiang: Jiangsu University Press, 2017. (in Chinese)

Jin X, Li D Y, Ma H, Ji J T, Zhao K X, Pang J. Development of single row automatic transplanting device for potted vegetable seedlings. Int J Agric & Biol Eng, 2018; 11(3): 67–75.

Chen Y S, Liu X C, Han B H, Cui Z C, Yang Y T, Guan C S, et al. Development report of China vegetable production mechanization in 2020. Journal of Chinese Agricultural Mechanization, 2021; 42(6): 1–9,34. (in Chinese)

Qin G. Demand analysis and prospect of vegetable transplanting mechanization. Agricultural Machinery Science and Technology Promotion, 2013; 4: 43–44.

Chen Y S. Development of facility vegetable industry (2): Overview of China’s vegetable mechanization development from 2022 to 2023. China Vegetable, 2023; 10: 5–10. (in Chinese)

Hu J P, Liu Y T, Liu W, Zhang S W, Han L H, Zeng T Y, et al. Experimental study on the combined seedling extraction device of vegetable automatic transplanting machine. Transactions of the CSAM, 2022; 53(S1): 110–117, 184. (in Chinese)

Shao Y Y, Han X, Xuan G T, Liu Y, Gao C, Wang G P, et al. Development of a multi-adaptive feeding device for automated plug seedling transplanter. Int J Agric & Biol Eng, 2021; 14(2): 91–96.

Li B, Gu S, Chu Q, Yang Y L, Xie Z J, Fan K J, et al. Development of transplanting manipulator for hydroponic leafy vegetables. Int J Agric & Biol Eng, 2019; 12(6): 38–44.

Huang M H, Tang Q, Song Z W, Liu H, Wu Y, Zhu T W. Development status and trends of the development of seedling pick-up mechanism of transplanter in dry land. Journal of Intelligent Agricultural Mechanization, 2023; 4(4): 57–64.

Cui Z C, Guan C S, Yang Y T, Gao Q S, Chen Y S, Xiao T Q. Research status of vegetable mechanized transplanting technology and equipment. Journal of Chinese Agricultural Mechanization, 2020; 41(3): 85–92. (in Chinese)

Ren L, Wang N, Cao W B, Li J Q, Ye X C. Trajectory planning and motion control of full-row seedling pick-up arm. Int J Agric & Biol Eng, 2020; 13(3): 41–51.

Zhang Y Z, Cao C M, Qin K, Zhu C L, Li G Y, Ge J, et al. Design and experiment of automatic sweet potato transplanter with linear seedling supplying. Journal of Intelligent Agricultural Mechanization, 2022; 3(2): 28–36.

Huang B. Air-pruning tray/container matrix transfer and transplanting system and methods. US20050016425AI . 2005-01- 27.

Ye B L, Zeng G J, Deng B, Yang C L, Liu J K, Yu G H. Design and tests of a rotary plug seedling pick-up mechanism for vegetable automatic transplanter. Int J Agric & Biol Eng, 2020; 13(3): 70–78.

Jin X, Tang L M, Ji J T, Wang C L, Wang S S. Potential analysis of an automatic transplanting method for healthy potted seedlings using computer vision. Int J Agric & Biol Eng, 2021; 14(6): 162–168.

Han C J, Xiao L Q, Xu Y, Zhang J, Li H L. Design and experiment of the automatic transplanter for chili plug seedlings. Transactions of the CSAE, 2021; 37(13): 20–29. (in Chinese)

Hu J P, Chang H, Yang L H, Han L H, Mao H P, Zhang S W. Design and experiment of control system for automatic transplanter picking up and spacing casting whole row of seedlings. Transactions of the CSAM, 2018; 49(6): 78–84. (in Chinese)

Liu W, Wang Q Y, Jiang H Y. Design and optimization of end effector for loose substrate grasping based on discrete element method. Biosystems Engineering, 2024; 241: 43–55.

Zhang M, Feng J, Gong C Y, Han B. Mechanism analysis of ejector mechanism of automatic dry field transplanting machine. Agricultural Mechanization Research, 2014; 36(3): 85–89. (in Chinese)

Ma X X, Li H, Cao W B, Yu S Y, Li S F. Optimization and experiment of working parameters of automatic seedling picking device for tomato seedlings transplanting. Transactions of the CSAE, 2020; 36(10): 46–55. (in Chinese)

Han L H, Mao H P, Hu J P, Xu J Y, Zhao Z R, Ma G X. Design and test of automatic transplanter for greenhouse plug seedlings. Transactions of the CSAM, 2016; 47(11): 59–67. (in Chinese)

Guan C S, Xu T, Cui Z C, et al. Optimized parameters for compression molding of vegetable seedling substrate block for mechanical transplanting. International Agricultural Engineering Journal, 2020; 29(3): 77–89.

Xin M J, Chen T Y, Zhang Q, Jiao J K, Bai X W, Song Y Q, et al. Parameters optimization for molding of vegetable seedling substrate nursery block with rice straw. Transactions of the CSAE, 2017; 33(16): 219–225. (in Chinese)

Dihingia P C, Kumar G V P, Sarma P K, Neog P. Production of soil block seedlings in plug trays for mechanical transplanting. International Journal of Vegetable Science, 2017; 23(5): 471–485.

Cui Z C, Guan C S, Xu T, Yang Y T, Xu B X, Chen Y S. Development status of technology and equipment of substrate block seedling cultivation and transplanting. Journal of Chinese Agricultural Mechanization, 2022; 43(5): 29–34. (in Chinese)

Hu Q L, Zhang Q S, Li X Z, Wan X Y, Wang L, Liao Q X. Design and parameter analysis of seedling collection device of rapeseed substrate block seedlings transplanter machine. Transactions of the CSAE, 2021; 37(10): 18–27. (in Chinese)

Xu T, Cui Z C, Guan C S, Chen Y S, Xiao T Q. Design and experiment of sending and taking seedling device of substrate block seedling transplanter. Journal of Chinese Agricultural Mechanization, 2021; 42(7): 50–55. (in Chinese)

Cui Z C, Guan C S, Xu T, Fu J J, Chen Y S, Yang Y T, et al. Design and experiment of transplanting machine for cabbage substrate block seedlings. INMATEH-Agricultural Engineering, 2021; 64(2): 375–384.

Cui Z C, Guan C S, Xu T, Li J C, Chen Y Y, Song J L, et al. Design and experiment of the automatic conveying and separating device for substate block seedling transplanting machine. Transactions of the CSAE, 2023; 39(13): 68–79. (in Chinese)

Chen F. Study on transporting, metering system of block seedling transplanter. Shihezi: Shihezi University, 2005. (in Chinese)

Downloads

Published

2025-08-21

How to Cite

Cui, Z., Fu, J., Li, J., Ji, H., Wu, C., Zheng, S., … Guan, C. (2025). Design and test of the progressive push-out automatic seedling taking device for vegetable substrate block seedlings. International Journal of Agricultural and Biological Engineering, 18(4), 89–100. https://doi.org/10.25165/ijabe.v18i4.9346

Issue

Vol. 18 No. 4 (2025): IJABE

Section

Power and Machinery Systems

License

IJABE is an international peer reviewed open access journal, adopting Creative Commons Copyright Notices as follows.


Authors who publish with this journal agree to the following terms:


  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).