Accurate calibration framework for the discrete element parameters of red kidney bean using flower pollination algorithm

Authors

  • XUezhen Wang Henan University of Science and Technology http://orcid.org/0000-0002-2179-0879
  • Kaiyuan Gu College of Agricultural Equipment Engineering, Henan University of Science and Technology, Luoyang 471000, Henan, China
  • Jiangtao Ji College of Agricultural Equipment Engineering, Henan University of Science and Technology, Luoyang 471000, Henan, China

Keywords:

raising cylinder method (RCM), discrete element method (DEM), parameter calibration, red kidney bean (RKB), flower pollination algorithm (FPA)

Abstract

Accurate calibration of discrete element method (DEM) parameters is essential for simulating the mechanical behavior of crop seeds and their interactions with agricultural equipment. However, most DEM parameters for red kidney beans (RKBs) remain unreported, and accuracy of conventional calibration methods still require further improvement. This study developed an accurate calibration approach for determining DEM parameters of RKBs. Physical properties of RKBs, including dimensional characteristics, densities, and frictional parameters, were first measured through laboratory experiments. Significant DEM parameters affecting the repose angle (RPA) were identified using the Plackett-Burman design, and their relationships with RPA were established using the Central Composite design. The optimal combination of parameters was then determined through grey wolf optimizer (GWO) and flower pollination algorithm (FPA). The results showed that moment of 12 s for RPA measurement and lifting velocity of 0.014 m/s were determined on aspects of higher accuracy in measuring repose angles and relatively less computation time and memory of usage in raising cylinder method simulations. An optimal combination of significant DEM parameters of RKBs is coefficient of static friction of 0.1338 and coefficient of rolling friction of 0.0308 optimized using flower pollination algorithm (FPA). The relative error between simulated and measured RPAs is 0.90% and the difference between simulated and measured RPAs did not reach a significant level (p>0.05). These results imply that the proposed calibration method effectively improves model accuracy, providing a reliable reference for DEM parameter calibration of crop seeds and supporting the design of RKB-related mechanized systems.      

Key words: raising cylinder method (RCM); discrete element method (DEM); parameter calibration; red kidney bean (RKB); flower pollination algorithm (FPA)

DOI: 10.25165/j.ijabe.20261904.10510

Citation: Wang X Z, Gu K Y, Ji J T. Accurate calibration framework for the discrete element parameters of red kidney bean usingflower pollination algorithm. Int J Agric & Biol Eng, 2026; 19(4): 43–50.

References

[1] Zheng B F, Jiang L W, Li X Y, Liao L Y, Tian P K, Li S R. White spot and degree of damage control technology research in the manufacturing process of kidney bean cans. Hunan Agric. Sci., 2021; 7: 70–74. (in Chinese)

[2] Li T. Experimental study on biomechanical properties of miscellaneous bean seeds and design of air-suction seed metering device. Master thesis, Shanxi Agricultural University, China, 2022. (in Chinese)

[3] Ma D X, Shi S, Li H, Wei G J, Zhou J L, Shi Y P, et al. DEM-CFD-based simulation and optimization of a combined pneumatic-centrifugal wheat seed-metering device. Int J Agric & Biol Eng, 2025; 18(5): 127–141.

[4] Liu C J, Zhao W Y, Feng B, Shi L R, Sun B G, Dai F, et al. Calibration of DEM parameters for coated sunflower seeds based on dynamic stacking angle. Int J Agric & Biol Eng, 2026; 19(1): 283–294.

[5] Wang X Z, Zhang Q K, Huang Y X, Ji J T. An efficient method for determining DEM parameters of a loose cohesive soil modelled using hysteretic spring and linear cohesion contact models. Biosyst. Eng., 2022; 215: 283–294.

[6] Zeng Z W, Ma X, Cao X L, Li Z H, Wang X C. Critical review of applications of discrete element method in agricultural engineering. Transactions of the CSAM, 2021; 52(4): 1–20. (in Chinese)

[7] Wang X Z, Gu K Y, Dai F, Lokker C, Zeng Z W. Efficient calibration of discrete element method parameters for garbanzo beans using swarm intelligence optimization algorithms. Inf. Process. Agric, 2026, In Press. DOI: 10.1016/j.inpa.2026.01.014.

[8] Shi F G, Wu M L, Zhao Z H, Chen H Y, Jiang X H, Quan W. Calibration of rototilled soil block discrete element parameters after rotary tillage in rape planting by machinery. Int J Agric & Biol Eng, 2026; 19(2): 28–38.

[9] Yang Y W, Li M, Tong J, Ma Y H. Study on the interaction between soil and the five-claw combination of a mole using the discrete element method. Appl. Bionics Biomecha, 2018; 2018: 7854052.

[10] Ucgul M, Fielke J M, Saunders C. Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modelling. Inf. Process. Agric., 2015; 2(2): 130–141.

[11] Yang H, Guo D L, Zhai Y B, Liang J H. Performance analysis and parameter optimization of peanut digging shovel operation based on discrete element analysis. Inf. Process. Agric., 2026; 13(1): 86–99.

[12] Zhu J Z, Zou M, Liu Y S, Gao K, Su B, Qi Y C. Measurement and calibration of DEM parameters of lunar soil simulant. Acta Astronautica, 2022; 191: 169–177.

[13] Li Y X, Li F X, Xu X M, Shen C P, Meng K P, Chen J, et al. Parameter calibration of wheat flour for discrete element method simulation based on particle scaling. Transactions of the CSAE, 2019; 35(16): 320–327. (in Chinese)

[14] Hu M J, Xia J F, Zhou Y, Luo C M, Zhou M K, Liu Z Y. Measurement and calibration of the discrete element parameters of coated delinted cotton seeds. Agriculture, 2022; 12(2): 286.

[15] Wu M C, Cong J L, Yan Q, Zhu T, Peng X Y, Wang Y S. Calibration and experiments for discrete element simulation parameters of peanut seed particles. Transactions of the CSAE, 2020; 36(23): 30–38. (in Chinese)

[16] Zhang S W, Zhang R Y, Chen T Y, Fu J, Yuan H F. Calibration of simulation parameters of Mung bean seeds using discrete element method and verification of seed-metering test. Transactions of the CSAM, 2022; 53(3): 71–79. (in Chinese)

[17] Sasmal B, Das A, Dhal K G, Saha R, Rai R, Bharasa T, Houssein E H. Artificial hummingbird algorithms: Theory, variants, analysis, applications, and performance evaluation. Computer Science Review, 2025; 56: 100727.

[18] Mirjalili S M, Lewis A. Grey wolf optimizer. Advances in Engineering Software, 2014; 69: 46–61.

[19] Yang X S, Karamanoglu M, He X S. Flower pollination algorithm: A novel approach for multiobjective optimization. Eng. Optimization, 2014; 46(9): 1222–1237.

[20] Zhang X J, Wang H T, Wang F Y, Lian Z G. Parameter calibration of discrete element model for alfalfa seeds based on EDEM simulation experiments. Int J Agric & Biol Eng, 2024; 17(3): 33–38.

[21] Chen Z P, Wassgren C, Veikle E, Ambrose K. Determination of material and interaction properties of maize and wheat kernels for DEM simulation. Biosyst. Eng., 2020; 195(C): 208–226.

[22] EDEM User Guide. DEM Solutions Ltd. Edinburgh, UK, 2014.

[23] Zhao H B, Huang Y X, Liu Z D, Liu W Z, Zheng Z Q. Applications of discrete element method in the research of agricultural machinery: A review. Agriculture, 2021; 11(5): 425.

[24] Qi L, Chen Y, Sadek M. Simulations of soil flow properties using the discrete element method (DEM). Comput. Electron. Agric., 2019; 157: 254–260.

[25] Liu F Y, Zhang J, Li B, Chen J. Calibration of parameters of wheat required in discrete element method simulation based on repose angle of particle heap. Transactions of the CSAE, 2016; 32(12): 247–253. (in Chinese)

[26] Liu H Y, Lu Q, Wang J W, Zhou W Q, Wang N H. Rapid calibration method for discrete element simulation parameters of columnar granular organic fertilizer with variable moisture content. Powder Technol, 2024; 448: 120354.

[27] Ma W P, You Y, Wang D C, Yin S J, Huan X L. Parameter calibration of alfalfa seed discrete element model based on RSM and NSGA-Ⅱ. Transactions of the CSAM, 2020; 51(8): 136–144. (in Chinese)

[28] Chen X Y, Wang X Z, Bai J, Fang W Q, Hong T Y, Zang N, et al. Virtual parameter calibration of pod pepper seeds based on discrete element simulation. Heliyon, 2024; 10(11): e31686.

Downloads

Published

2026-09-03

How to Cite

(1)
Wang, X.; Gu, K.; Ji, J. Accurate Calibration Framework for the Discrete Element Parameters of Red Kidney Bean Using Flower Pollination Algorithm. Int J Agric & Biol Eng 2026, 19, 34-41.

Issue

Vol. 19 No. 4 (2026): IJABE

Section

Applied Science, Engineering and Technology

License

Copyright (c) 2026 International Journal of Agricultural and Biological Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

IJABE is an international peer reviewed, open access journal, adopting Creative Commons Copyright Notices as follows.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).