Design and experiment of a human-machine cooperative Chinese wolfberry harvester
Abstract
Abstract: Against the backdrop of large-scale and high-quality development of the wolfberry industry, mechanized harvesting dominated by vibration-based picking methods still struggles to simultaneously achieve low fruit damage and accurate harvesting in the short term. Accordingly, human-machine cooperation has emerged as a feasible solution for Chinese wolfberry mechanized harvesting at the current stage. Aiming at the agronomic characteristics of traditional Chinese wolfberry cultivation, such as prone trunk deflection and ground-hugging fruiting branches, a human-machine cooperative inter-row tracked Chinese wolfberry harvester was developed to address the technical bottlenecks of harvesting equipment regarding high trafficability, high fruit collection rate and low fruit damage rate. The fruit catching devices on both sides of the harvester are adjustable in width and height to adapt to complex field conditions and enhance inter-row operation trafficability. The width adjustment enables the bilateral catching devices to close centered on tree trunks, effectively reducing fruit dropping loss. Based on the collision kinematics analysis and simulation concerning fruit falling height, catching plate inclination angle and buffer material selection, flexible fruit catching plates were designed to mitigate collision damage and realize low-damage fruit collection. Meanwhile, the conveying and obstacle avoidance mechanisms were optimized, and an integrated technical scheme of “catching-conveying-separating” fruit collection and wind separation was established, achieving an impurity removal rate of 97.5 % through pneumatic separation. Field performance tests were conducted to verify the driving stability and operational efficiency of the machine. The results demonstrated that the prototype could travel stably and perform in-situ steering on sandy loam and soft ground. Under typical working conditions, the immediate total fruit damage rate was approximately 2.27 %, and the 24-hour delayed damage rate reached 4.07 %. This research indicates that the proposed human-machine collaborative Chinese wolfberry harvester can fully meet the field operation requirements of Chinese wolfberry orchards and alleviate the labor shortage during the harvesting season to a certain extent.
Key words: Chinese wolfberry; human-machine cooperative harvesting equipment; crawler-type harvesting platform; fruit catching and pneumatic separation
DOI: 10.25165/j.ijabe.20261904.10678
Citation: Pan C H, Cao Y X, Tian Z C, He J, Mei S, Song Z Y. Design and experiment of a human-machine cooperative
Chinese wolfberry harvester. Int J Agric & Biol Eng, 2026; 19(4): 79–87.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 International Journal of Agricultural and Biological Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
IJABE is an international peer reviewed, open access journal, adopting Creative Commons Copyright Notices as follows.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
