Bench cutting tests and analysis for harvesting hemp stalk
Abstract
Keywords: hemp stalk, hemp harvester, blade, bench cutting test, cutter design
DOI: 10.25165/j.ijabe.20171006.3475
Citation: Shen C, Zhang B, Li X W, Yin G D, Chen Q M, Xia C H. Bench cutting tests and analysis for harvesting hemp stalk. Int J Agric & Biol Eng, 2017; 10(6): 56–67.
Keywords
Full Text:
PDFReferences
Leaf Science. Five differences between hemp and marijuana. Available at: http://www.leafscience.com/2014/09/16/5- differences-hemp-marijuana. Accessed on [2014-09-16]
Karus M, Vogt D. European hemp industry: cultivation, processing and product lines. Euphytica, 2004; 140(1-2): 7–12.
House J D, Neufeld J, Leson G. Evaluating the quality of protein from hemp seed (Cannabis sativa L.) products through the use of the protein digestibility-corrected amino acid score method. Journal of Agricultural and Food Chemistry, 2010; 58(22): 11801–11807.
Zhou Y, Li X W, Shen C, Tian K P, Zhang B, Huang J C. Experimental analysis on mechanical model of industrial hemp stalk. Transactions of the CSAE, 2016; 32(9): 22–29. (in Chinese)
Kymäläinen H R, Sjöberg A M. Flax and hemp fibers as raw materials for thermal insulations. Building and Environment, 2007; 42(3): 1016–1024.
Sun X Y, Guan Y T, Wen G Q, Zhu B Y. Study on the characteristics of hemp and its applications. Journal of Textile Research, 2001; 22(4): 234–236. (in Chinese)
Muzyczek M, Kozłowski R M. The use of flax and hemp for textile applications. Handbook of Natural Fibres: Processing and Applications, 2012; pp.312–328. ISBN 1845696980.
Dai F J. Studies on the origin, uses and geographical distribution of hemp. Journal of Southwest China Normal University (Natural Science), 1989; 14(3): 114–119. (in Chinese)
Liu H. Study on factors affecting yield of industrial hemp. MS Dissertation, Kunming: Yunnan University, 2015; China. (in Chinese)
Lü J N, Long C H, Ma L, Liu J J, He H B. Design and experiment on decorticator of hemp fresh stem. Transactions of the CSAE, 2014; 30(14): 298–307. (in Chinese)
National Bureau of Statistics of China. 12-11 Output of major farm products per hectare. China Statistical Yearbook 2016. 2016; pp.397. ISBN 9787503779176. (in Chinese)
Shen C, Chen Q M, Li X W, Tian K P, Huang J C, Zhang B. Experimental analysis on single-stalk cutting of hemp. International Agricultural Engineering Journal, 2016; 25(4): 187–196.
Shen C, Li X W, Tian K P, Zhang B, Huang J C, Chen Q M. Experimental analysis on mechanical model of ramie stalk. Transactions of the CSAE, 2015; 31(20): 26–33. (in Chinese)
Zhou Y, Shen C, Li X W, Zhang B, Huang J C, Tian K P. Design and test of 4LMD-160 hemp harvester. Applied Mechanics and Materials, 2016; 851: 389–395.
Shen C, Li X W Zhang B Tian K P, Huang J C, Chen Q M. Bench experiment and analysis on ramie stalk cutting. Transactions of the CSAE, 2016; 32(1): 68–76. (in Chinese)
Shen C, Zhang B, Tian K P, Li X W, Chen Q M. Test and analysis on axial compressive mechanics of ramie stalk. International Journal of Engineering and Technology, 2017; 9(6): 432–436.
Zhao Z, Li Y M Xu L Z, Song S J. Experiment on Cutting Mechanical Property of Single Super Rice Stalk. Transactions of the CSAM, 2010; 41(10): 72–75. (in Chinese)
Zhang S F, Song Z H, Yan Y F, Li Y D, Li F D. Development and experiment of measure and control system for stalk cutting test bench. Transactions of the CSAE, 2013; 29(Supp.1): 10–17. (in Chinese)
Liu Q T, Ou Y G, Qing S L, Huang S X. High-speed photography analysis on the damage process in cutting sugarcane stalk with smooth-edge blade. Transactions of the CSAM, 2007; 38(10): 31–35. (in Chinese)
Li Y M, Qing T D, Chen J, Zhao Z. Experimental study and analysis on mechanical property of corn stalk reciprocating cutting. Transactions of the CSAE, 2011; 27(1): 160–164. (in Chinese)
Gupta C P, Oduori M F. Design of the revolving knife-type sugarcane base cutter. Transactions of the ASAE, 1992, 35(6): 1747–1752.
Liu Z P. Design and study on disc cutter of ramie. MS Dissertation, Changsha: Hunan Agricultural University, 2011; China. (in Chinese)
Liao Q X, Shu C X, Tian B P, Huang H D, Wang J. Research on the cutting process based on high- speed photography technology for the arundo donax l. Journal of Huazhong Agricultural University, 2007; 26(3): 415–418. (in Chinese)
McRandal D M, MeNulty P B. Impact cutting behavior of forage crops mathematical model and laboratory tests. Journal of Agricultural Engineering Research, 1978; 23(3): 313–328.
Finner M F. Particle movement through the cutter-head of a cylindrical type forage harvester. Transactions of the ASAE, 1975; 18(6): 1017–1020.
Shen C, Chen Q M, Li X W, Zhang B, Wang J G, Huang J C, et al. Design and experiment on double-knife ramie stalk cutting test bench. Journal of Chinese Agricultural Mechanization, 2013; 34(5): 114–118. (in Chinese)
Chen, Y, Jean L G, Liu J. Power requirements of hemp cutting and conditioning. Biosystems Engineering, 2004; 87(4): 417–424.
Sausserde R, Adamovics A, Ivanovs S, Bulgakov V. Investigations into growing and harvesting industrial hemp. Journal of Research & Applications in Agricultural Engineering, 2013; 58(4): 150–154.
Wang Y F, Qiu C S, Hao D M, Chen X B, Long S H, Deng X, et al. Production status and developmental direction of hemp in China. Modern Agricultural Science and Technology, 2009; (23): 84–86.
Ren L Q. Quadratic regression of orthogonal rotating combinatorial design. Regression Design and its optimization. 2009; pp.40–49. ISBN 9787030254344. (in Chinese)
Tang Q Y, Zhang C X. Data Processing System (DPS) software with experimental design, statistical analysis and data mining developed for use in entomological research. Insect Science, 2013; 20(2): 254–260.
Copyright (c)