Effects of extrusion conditions on the physicochemical properties of soy protein/gluten composite

Min Wu, Yang Sun, Chonghao Bi, Fang Ji, Borui Li, Junjie Xing

Abstract


Soybean protein-gluten blend was extruded using a co-rotating twin-screw extruder. Effects of different extrusion conditions on the textural properties of extrudates were analyzed by central composite design through the evaluation of texturization index, water holding capacity, and hardness of extruded protein products. Extrusion process variables including feed moisture content (40%-60%), screw speed (12-20 Hz), extrusion temperature (120°C-180°C), and gluten content (16%-32%) were studied by the nonlinear regression equations analysis. The extrusion process was also optimized using response surface methodology (RSM). The influence of moisture content on the hardness of extrudate was the most significant. The optimized results, including feed moisture content, extrusion temperature, screw speed and gluten content were 49.18%-50.15%, 155.24°C-159.86°C, 16.41-16.73 Hz, 20.00%-20.03%, respectively. The microstructures of TISP products were analyzed by scanning electron microscopy (SEM) and the changes of protein molecules before and after extrusion were also analyzed by SDS-PAGE electrophoresis.
Keywords: soybean protein, gluten, extrusion, response surface methodology (RSM), SDS-PAGE electrophoresis, Microstructural properties
DOI: 10.25165/j.ijabe.20181104.4162

Citation: Wu M, Sun Y, Bi C H, Ji F, Li B R, Xing J J. Effects of extrusion conditions on the physicochemical properties of soy protein/gluten composite. Int J Agric & Biol Eng, 2018; 11(4): 230-237.

Keywords


soybean protein, gluten, extrusion, response surface methodology (RSM), SDS-PAGE electrophoresis, Microstructural properties

Full Text:

PDF

References


Osen R, Toelstede S, Wild F, Eisner P, Schweiggert-Weisz U. High moisture extrusion cooking of pea protein isolates: Raw material characteristics, extruder responses, and texture properties. Journal of Food Engineering, 2014; 127: 67–74.

Asgar M A, Fazilah A, Huda N, Bhat R, Karim A A. Nonmeat protein alternatives as meat extenders and meat analogs. Comprehensive Reviews in Food Science and Food Safety, 2010; 9(5): 513–529.

Shih M C, Hwang T S, Chou H Y. Physicochemical and functional property changes in soy protein isolates stored under high relative humidity and temperature. Journal of Food Science and Technology, 2016; 53(1): 902–908.

Sun J, Zhou W, Yan L, Huang D, Lin L. Extrusion-based food printing for digitalized food design and nutrition control. Journal of Food Engineering, 2018; 220: 1–11.

Chen F L, Wei M, Zhang B, Ojokoh A O. System parameters and product properties response of soybean protein extruded at wide moisture range. Journal of Food Engineering, 2010; 96(2): 208–213.

Guerrero P, Beatty E, Kerry J P, de la Caba K. Extrusion of soy protein

with gelatin and sugars at low moisture content. Journal of Food Engineering, 2012;110(1): 53–59.

Martins V B, Netto F M. Physicochemical and functional properties of soy protein isolate as a function of water activity and storage. Food Research International, 2006; 39(2): 145–153.

Riaz M N. Textured soy protein and its uses. Agro Food Industry Hi Tech, 2001; 12(5): 28–31.

Cheftel J C, Kitagawa M, Quéguiner C. New protein texturization processes by extrusion cooking at high moisture levels. Food Reviews International, 1992; 8(2): 235–275.

Guo Q, Joseph M, Setia R, Vikhona H, Sharma K, Alavi S. Extruded corn soy blends: physicochemical and molecular characterization. Journal of Cereal Science, 2018; 79: 486–493.

Chen F L, Wei Y M, Zhang B. Chemical cross-linking and molecular aggregation of soybean protein during extrusion cooking at low and high moisture content. LWT - Food Science and Technology, 2011; 44(4): 957–962.

Wu M, Liu Y, Wang L J, Li D, Mao Z H. Effects of extrusion parameters on physicochemical properties of flaxseed snack and process optimization. Int J Agric Biol Eng, 2015; 8(5): 121–131.

Fang Y, Zhang B, Wei Y. Effects of the specific mechanical energy on the physicochemical properties of texturized soy protein during high-moisture extrusion cooking. Journal of Food Engineering, 2014; 121: 32–38.

Lei H, Ruan R, Fulcher R G, Lengerich B V. Color development in an extrusion-cooked model system. Int J Agric Biol Eng, 2008; 1(2): 55-63.

Altan A, McCarthy K L, Maskan M. Evaluation of snack foods from barley–tomato pomace blends by extrusion processing. Journal of Food Engineering, 2008; 84(2): 231–242.

Gui Y, Gil S K, Ryu G H. Effects of extrusion conditions on the physicochemical properties of extruded red ginseng. Preventive Nutrition and Food Science, 2012; 17(3): 203–209.

Guo X, Sun X, Zhang Y, Wang R, Yan X. Interactions between soy protein hydrolyzates and wheat proteins in noodle making dough. Food Chemistry, 2018; 245: 500–507.

Li S Q, Wu M, Zhao D L, Liu Y, Sun Y, Li D. Rheological properties of flaxseed meal and soybean protein isolate blend by extrusion. Int J Agric Biol Eng, 2017; 10(4): 224–233.

Akdogan H. Pressure, torque, and energy responses of a twin screw extruder at high moisture contents. Food Research International, 1996; 29(56): 423–429.

Sheard P R, Fellows A, Ledward D A, Mitchell J R. Macromolecular changes associated with the heat treatment of soy isolates. Journal of Food Technology, 1986; 21: 55–60.

Wu M, Li D, Wang L J, Özkan N, Mao Z H. Rheological properties of extruded dispersions of flaxseed-maize blend. Journal of Food Engineering, 2010; 98(4): 480–491.

Stojceska V, Ainsworth P, Plunkett A, İbanoğlu Ş. The advantage of using extrusion processing for increasing dietary fiber level in gluten-free products. Food Chemistry, 2010; 121(1): 156–164.

Silva E M M D, Ascheri J L R, Ascheri D P R. Quality assessment of gluten-free pasta prepared with a brown rice and corn meal blend via thermoplastic extrusion. LWT - Food Science and Technology, 2016; 68: 698–706.

Osen R, Toelstede S, Eisner P, Schweiggert-Weisz U. Effect of high moisture extrusion cooking on protein-protein interactions of pea (Pisum sativum L.) protein isolates. International Journal of Food Science & Technology, 2015; 50(6): 1390–1396.

Cabrera-Chávez F, Calderón de la Barca A M, Islas-Rubio A R, Marti A, Marengo M, Pagani M A, et al. Molecular rearrangements in extrusion processes for the production of amaranth-enriched, gluten-free rice pasta. LWT - Food Science and Technology, 2012; 47(2): 421–426




Copyright (c) 2018



2023-2026 Copyright IJABE Editing and Publishing Office