Design and feasibility analysis of a graded harvesting end-effector with the function of soluble solid content estimation

Yufei Lin, Hao Liang, Junhua Tong, Haoyu Shen, Xiaping Fu, Chuanyu Wu

Abstract


In response to the prevailing scarcity of labor and with the aim of augmenting the proportion of premium-quality fruits, a robotic grading end-effector system for harvesting was meticulously designed. The end-effector could measure the soluble solid content (SSC) of peaches during the harvesting process to evaluate the quality of the fruit, thereby facilitating real-time grading during harvesting. As comprising a harvesting component and an information-gathering segment, the end-effector system was optimized with the primary structural parameters of its adaptive fingers using a mathematical model of peach morphology. Also, the buffering materials for mitigating the pressure exerted by the adaptive fingers on the peaches were compared. Furthermore, feasibility analyses of the grasping actions were conducted based on the interaction forces between the adaptive fingers and the peaches. To grade the quality of peaches, SSC was used as an indicator to assess and grade the quality of the peaches. The spectra of peaches within the wavelength range of 590-1100 nm were collected, and a predictive model for SSC was developed. The correlation coefficients for the calibration set and prediction sets of the predictive model were 0.880 and 0.890, with corresponding root mean square errors of 0.370% and 0.357% Brix, respectively. In addition, a robustness and accuracy assessment was conducted using 30 peach samples, yielding a correlation coefficient of 0.936 and a standard error of 0.386% Brix between the predicted and measured values of SSC. The results confirm that the end-effector can measure the SSC of peaches during the collection process, providing novel concepts and theoretical foundations for real-time harvesting and grading.
Keywords: robot harvesting, graded end-effector, soluble solids, near-infrared spectroscopy
DOI: 10.25165/j.ijabe.20241705.7901

Citation: Lin Y F, Liang H, Tong J H, Shen H Y, Fu X P, Wu C Y. Design and feasibility analysis of a graded harvesting end-effector with the function of soluble solid content estimation. Int J Agric & Biol Eng, 2024; 17(5): 239-246.

Keywords


robot harvesting, graded end-effector, soluble solids, near-infrared spectroscopy

Full Text:

PDF

References


Yao J H, Chen W J, Fan K. Recent advances in light irradiation for improving the preservation of fruits and vegetables: A review. Food Bioscience, 2023; 56: 103206.

Jayasooriya L S H, Shin M H, Wijethunga W M U D, Lee S K, Cho J G, Jang S H, et al. Selection of a proper maturity index for the mechanical harvesting of ‘Mihong’ peach fruit. Horticulturae, 2023; 9（7）: 730.

Hernández-Martínez N R, Blanchard C, Wells D, Salazar-Gutiérrez M R. Current state and future perspectives of commercial strawberry production: A review. Scientia Horticulturae, 2023; 312: 111893.

Mhamed M, Kabir M H, Zhang Z. Developments of the automated equipment of apple in the orchard: A comprehensive review. In: Towards Unmanned Apple Orchard Production Cycle. Springer, 2023; pp: 1–49.

Davidson J, Bhusal S, Mo C, Karkee M, Zhang Q. Robotic manipulation for specialty crop harvesting: A review of manipulator and end-effector technologies. Global Journal of Agricultural and Allied Sciences, 2020; 2（1）: 25–41.

Vrochidou E, Tsakalidou V N, Kalathas I, Gkrimpizis T, Pachidis T, Kaburlasos V G. An overview of end effectors in agricultural robotic harvesting systems. Agriculture, 2022; 12（8）: 1240.

Park Y, Seol J, Pak J, Jo Y, Jun J, Son HI. A novel end-effector for a fruit and vegetable harvesting robot: mechanism and field experiment. Precision Agriculture, 2022; 24（3）: 948–970.

Ji W, He G Z, Xu B, Zhang H W, Yu X W. A new picking pattern of a flexible three-fingered end-effector for apple harvesting robot. Agriculture, 2024; 14（1）: 102.

Zhao Y X, Wan X F, Duo H X. Review of rigid fruit and vegetable picking robots. Int J Agric & Biol Eng, 2023; 16（5）: 1–11.

Bontsema J, Hemming J, Pekkeriet E, Saeys W, Edan Y, Shapiro A, et al. CROPS: Clever robots for crops. Engineering & Technology Reference, 2015; pp.1–11. .

Li Z Y, Yuan X J, Yang Z P. Design, simulation, and experiment for the end effector of a spherical fruit picking robot. International Journal of Advanced Robotic Systems, 2023; 20（6）: 1–13.

Li Z, Yuan X, Wang C. A review on structural development and recognition–localization methods for end-effector of fruit-vegetable picking robots. International Journal of Advanced Robotic Systems, 2022; 19（3）: 1–29.

Park Y, Seol J, Pak J, Jo Y, Kim C, Son H I. Human-centered approach for an efficient cucumber harvesting robot system: Harvest ordering, visual servoing, and end-effector. Computers and Electronics in Agriculture, 2023; 212: 108116.

Roshanianfard A, Noguchi N. Pumpkin harvesting robotic end-effector. Computers and Electronics in Agriculture, 2020; 174: 105503.

Zhou H Y, Wang X, Au W, Kang H W, Chen C. Intelligent robots for fruit harvesting: Recent developments and future challenges. Precision Agriculture, 2022; 23（5）: 1856–1907.

Xiong Y, Peng C, Grimstad L, From P J, Isler V. Development and field evaluation of a strawberry harvesting robot with a cable-driven gripper. Computers and Electronics in Agriculture, 2019; 157: 392–402.

Xu L M, Liu X D, Zhang K L, Xing J J, Yuan Q C, Chen J W, et al. Design and test of end-effector for navel orange picking robot. Transactions of the CSAE, 2018; 34（12）: 53–61. （in Chinese）

Mu L T, Cui G P, Liu Y D, Cui Y J, Fu L S, Gejima Y. Design and simulation of an integrated end-effector for picking kiwifruit by robot. Information Processing in Agriculture, 2020; 7（1）: 58–71.

Terrile S, Argüelles M, Barrientos A. Comparison of different technologies for soft robotics grippers. Sensors, 2021; 21（9）: 3253.

Bhargava A, Bansal A. Quality evaluation of Mono & bi-Colored Apples with computer vision and multispectral imaging. Multimedia Tools and Applications, 2020; 79: 7857–7874.

Bhargava A, Bansal A. Classification and grading of multiple varieties of apple fruit. Food Analytical Methods, 2021; 14（7）: 1359–1368.

Bhargava A, Bansal A. Fruits and vegetables quality evaluation using computer vision: A review. Journal of King Saud University - Computer and Information Sciences, 2021; 33（3）: 243–257.

Bhargava A, Bansal A. Automatic detection and grading of multiple fruits by machine learning. Food Analytical Methods, 2020; 13（3）: 751–761.

Hussein Z, Fawole O A, Opara U L. Harvest and postharvest factors affecting bruise damage of fresh fruits. Horticultural Plant Journal, 2020; 6（1）: 1–13.

Dewi T, Risma P, Oktarina Y. Fruit sorting robot based on color and size for an agricultural product packaging system. Bulletin of Electrical Engineering and Informatics, 2020; 9（4）: 1438–1445.

Lu Z H, Zhao M F, Luo J, Wang G H, Wang D C. Design of a winter-jujube grading robot based on machine vision. Computers and Electronics in Agriculture, 2021; 186: 106170.

Chen J Q, Qiang H, Wu J H, Xu G W, Wang Z K. Navigation path extraction for greenhouse cucumber-picking robots using the prediction-point Hough transform. Computers and Electronics in Agriculture, 2021; 180: 105911.

Hemrattrakun P, Nakano K, Boonyakiat D, Ohashi S, Maniwara P, Theanjumpol P, et al. Comparison of reflectance and interactance modes of visible and near-infrared spectroscopy for predicting persimmon fruit quality. Food Analytical Methods, 2021; 14: 117–126.

Kusumiyati K, Munawar A A, Suhandy D. Fast, simultaneous and contactless assessment of intact mango fruit by means of near infrared spectroscopy. AIMS Agriculture and Food, 2021; 6（1）: 172–184.

Shao Y Y, Wang Y X, Xuan G T. In-field and non-invasive determination of internal quality and ripeness stages of Feicheng peach using a portable hyperspectral imager. Biosystems Engineering, 2021; 212: 115–125.

Goyal R, Kingsly A, Kumar P, Walia H. Physical and mechanical properties of aonla fruits. Journal of Food Engineering, 2007; 82（4）: 595–599.

Popov V L. Contact mechanics and friction. Berlin: Springer Berlin Heidelberg, 2010; pp.60–62. doi:10.1007/978-3-642-10803-7.

Sarkar P. Use of shaking mechanism and robotic arm in fruit harvesting: A comprehensive review. Journal of Crop and Weed, 2021; 17（2）: 1–9.

Wu X, Li G L, He F Y. Nondestructive analysis of internal quality in pears with a self-made near-infrared spectrum detector combined with multivariate data processing. Foods, 2021; 10（6）: 1315.

Zhang H L, Zhan B S, Pan F, Luo W. Determination of soluble solids content in oranges using visible and near infrared full transmittance hyperspectral imaging with comparative analysis of models. Postharvest Biology and Technology, 2020; 163: 111148.

Wang J H, Wang J, Chen Z, Han D H. Development of multi-cultivar models for predicting the soluble solid content and firmness of European pear （Pyrus communis L.） using portable vis-NIR spectroscopy. Postharvest Biology and Technology, 2017; 129: 143–151.




Copyright (c) 2024 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office