Gentian stem harvesting device based on bionic flexible rollers

Hongguang Cui, Jinming Zhang, Guangshuo Chen, Qingchen Tang, Wenzhong Huang, Liyan Wu

Abstract


Aiming at the problem of incomplete stem removal in the process of Gentian root and stem separation, a roller-type Gentian stem removal device was designed. Based on the mechanical characteristics of Gentian stems and the force analysis of the extraction process, the operating conditions for the complete removal of Gentian stems were determined. When the tensile force exerted by the stem-pulling rollers on the Gentian stems is less than the tensile force of the Gentian stems and greater than the maximum tensile force required for the Gentian stems to be removed at the stem bases, the complete removal of Gentian stems from the stem base can be realized. The bionic design method is used to construct the bionic flexible surfaces tructure of the stem-pulling rollers by taking the tree frog toe pad as the bionic prototype and investigating its flexible surface microstructure and friction-enhancing characteristics. EDEM simulation software is used to establish the contact model between the bionic flexible stem-pulling rollers and Gentian stems, and the optimal structural parameters of the bionic flexible surface are determined through simulation tests. The optimal working parameters of the bionic flexible roller are determined through test rig tests. The experimental results showed that when the diameter of the hexagonal prism of the bionic surface was 5.67 mm, the spacing of adjacent hexagonal prisms was 2.62 mm, and the height of the hexagonal prism was 3.21 mm, the bionic flexible stem-pulling rollers exerted a maximum tensile force of 30.23 N, and the Gentian stems were not broken. When the speed of the rollers was 195 r/min, the spacing between stem-pulling rollers was 3.0 mm, and the height of the rollers clamping position was 250 mm, the maximum tensile force required for Gentian stem removal was 13.88 N, and the netremoval rate reached 94.35%.
Keywords: Gentian harvest, bionic design, increased friction, bionic flexible rollers
DOI: 10.25165/j.ijabe.20241706.8453

Citation: Cui H G, Zhang J M, Chen G S, Tang Q C, Huang W Z, Wu L Y. Gentian stem harvesting device based on bionic flexible rollers. Int J Agric & Biol Eng, 2024; 17(6): 66–75.

Keywords


Gentian harvest, bionic design, increased friction, bionic flexible rollers

Full Text:

PDF

References


Chang-Liao W L, Chien C F, Lin L C, Tsai T H. Isolation of gentiopicroside from Gentianae Radix and its pharmacokinetics on liver ischemia/reperfusion rats. J. Ethnopharm, 2012; 141: 668–673.

Lian L H, Wu Y L, Wan Y, Li X, Xie W X, Nan J X. Anti-apoptotic activity of gentiopicroside in D-galactosamine/lipopolysaccharide-induced murine fulminant hepatic failure. Chemico-Biological Interactions, 2010; 188(1): 127–133.

The State Pharmacopoeia Committee of China. The Pharmacopoeia of the People’s Republic of China. Chemical Industry Press, Beijing, 2015; Part 1, 96p. (in Chinese)

Kim J A, Son N S, Son J K, Jahng Y, Chang H W, Jang T S, et al. Two new secoiridoid glycosides from the rhizomes of Gentiana scabra Bunge. Arch. Pharm. Res., 2009; 32: 863–867.

Sun J B, Li X Q, Wang X Y. Optimised design and analysis of potato harvesting machines. Journal of Agricultural Mechanization Research, 2017; 39(7): 83–88. (in Chinese)

Zhang J, Wang J, Du D D. Design and testing of self-propelled tracked single-row cabbage harvester. Transactions of the CSAM, 2022; 53(12): 134–146. (in Chinese)

Ji X, Du X W, Wang S G. Design and testing of a rootstock separator for carrot harvesters. Transactions of the CSAM, 2016; 47(3): 82–89. (in Chinese)

Yu Z Y, Hu Z C, Wang H O. Optimisation and testing of the parameters of the garlic seedling separation mechanism. Transactions of the CSAE, 2015; 31(1): 40–46. (in Chinese)

Wang J Y, Dong S P, Lv H Z. Development of cotton straw harvesting technology at home and abroad. 2008 Annual Academic Conference of the CSAM, Jinan, Shandong, China. 2008, 09.

Zhang J X, Zhou H M, Cai J L. Design and testing of a cross shaft-to-roller straw lifting device. Transactions of the CSAE, 2021; 37(7): 43–52. (in Chinese)

Zhang F, Wang W, Zhang G Y, Wang J, Qiu Z M, Mao P J. Gait analysis of goat at different slopes and study on biomimetic walking mechanism. Int J Agric & Biol Eng, 2016; 9(3): 40–47.

Fu J, Qian Z H, Ren L Q. Morphologic effects of filiform papilla root on the lingual mechanical functions of Chinese yellow cattle. International Journal of Morphology, 2016; 34(1): 63–77.

Kou T X. Key technology research on onion harvesting machine clamping and conveying device. Master Thesis. Qingdao University of Technology, 2019. (in Chinese)

Ge Y, Zhang L X, Gu J W. Optimisation and testing of parameters for a roller-type saffron harvesting unit. Transactions of the CSAE, 2015; 31(21): 35–42. (in Chinese)

Chirende B, Li J. Review on application of biomimetics in the design of agricultural implements. Biotechnology and Molecular Biology Reviews, 2009; 4(2): 42–48.

Liu X M, Zhao DC, Chen L. Biomimetic tribology development status and application prospects. Chinese Journal of Construction Machinery, 2019; 17(2): 95–101. (in Chinese)

Zhang Z X. Study of the frictional characteristics of face woven flexible friction pairs. Master Thesis. Shandong University of Science and Technology. Qingdao, Shandong Province, 2020. (in Chinese)

Fu J, Zhang Y C, Chen Z. Design and testing of a bionic threshing tooth shape based on the filiform papillae structure of the yellow cow tongue. Transactions of the CSAM, 2019; 50(7): 167–176. (in Chinese)

Wang C. Optimisation of the design of a bionic drum scraping and pulling banana stalk fibre extractor. Master Thesis. Hainan University. 2017. (in Chinese)

Thirunavukkarasu N, Peng S Q, Gunasekaran H B, Yang Z, Wu L X, Weng Z X. Responsive friction modulation of 3D printed elastomeric bioinspired structures. Tribology International, 2022; 175: 107823.

Zhang L W, Chen W H, Wang Y. Study of bionic surgical gripping surfaces based on wet adhesion of tree frog pedipalps. Journal of Mechanical Engineering, 2018; 54(17): 14–20. (in Chinese)

Zhang L W, Chen W H, Zhang P F. Boundary friction study of a bionic hexagonal surface based on tree frog paws. Chinese Science Bulletin, 2016; 61(23): 2596–2604. (in Chinese)

Chen X. Design and experimental study of a bionic structure to improve the tribological properties of rubber surfaces. Master Thesis. Jilin University, 2008. (in Chinese)

Fu H, Wang C R, Jin C. Modelling methods for maturing wheat plants. Journal of Northeast Normal University (Natural Science Edition), 2017; 49(2): 64–68.

Shi J R, Dai F, Zhao W Y. Experimental validation of discrete element flexibility modelling and contact parameters for caraway stems. Transactions of the CSAM, 2022; 53(10): 146–155.

Xu Y F, Zhang X L, Wu S, Chen C, Wang J Z, Yuan S Q, et al. Numerical simulation of particle motion at cucumber straw grinding process based on EDEM. Int J Agric & Biol Eng, 2020; 13(6): 227–235.

Guo Q, Zhang X L, Xu Y F. EDEM-based simulation and experimental study of the cutting performance of tomato straw. Journal of Drainage and Irrigation Machinery Engineering, 2018; 36(10): 1017–102.




Copyright (c) 2024 International Journal of Agricultural and Biological Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

2023-2026 Copyright IJABE Editing and Publishing Office